PULP PROPERTIES

Yes
No
T 200 Laboratory beating of pulp (Valley beater method)
T 205 Forming handsheets for physical tests of pulp
T 207 Water solubility of wood and pulp
T 210 Sampling and testing wood pulp shipments for moisture
T 211 Ash in wood, pulp, paper, and paperboard: combustion at 525 degrees C
T 212 One percent sodium hydroxide solubility of wood and pulp
T 213 Dirt in pulp
T 220 Physical testing of pulp handsheets
T 221 Drainage time of pulp
T 226 Specific external surface of pulp
T 227 Freeness of pulp (Canadian standard method)
T 230 Viscosity of pulp (capillary viscometer method)
T 231 Zero-span breaking strength of pulp (dry zero-span tensile)
T 232 Fiber length of pulp by projection
T 233 Fiber length of pulp by classification
T 234 Coarseness of pulp fibers
T 235 Alkali solubility of pulp at 25 C
T 236 Kappa number of pulp
T 240 Consistency (concentration) of pulp suspensions
T 248 Laboratory beating of pulp (PFI mill method) - (currently withdrawn, but could be proposed for reinstatement)
T 254 Cupriethylenediamine disperse viscosity of pulp (falling fall method)
T 257 Sampling and preparing wood for analysis
T 258 Basic density and moisture content of pulpwood
T 259 Species identification of nonwood plant fibers
T 261 Fines fraction by weight of paper stock by wet screening
T 262 Preparation of mechanical pulps for testing
T 263 Identification of wood and fibers from conifers
T 264 Preparation of wood for chemical analysis
T 265 Natural dirt in wood chips
T 267 Compression wood identification in pulpwood
T 268 Weight-volume measurement of pulpwood
T 271 Fiber length of pulp and paper by automated optical analyzer using polarized light
T 273 Wet zero-span tensile strength of pulp - currently withdrawn but work item has been opened for reinstatement
T 274 Laboratory screening of pulp (MasterScreen - type instrument)
T 275 Screening of pulp (Somerville-type equipment)
T 276 Degree of fiber bonding index by short-span tensile testing - currently withdrawn but could be reviewed for reinstatement
T 277 Macro stickies content in pulp: the "pick-up" method
T 278 Pulp screening (Valley-type screening device)
T 282 Hexeneuronic acid content of chemical pulp
T 400 Sampling and accepting a single lot of paper, paperboard, containerboard, or related product
T 563 Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis
T 564 Transparent chart for the estimation of defect size
T 568 Physical area of sub-visible contraries in pulp, paper, and paperboard by image analysis
T 1200 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility
T 1205 Dealing with suspect (outlying) test determinations
T 1210 Units of measurement and conversion factors
T 1211 Acceptance procedures for laboratories providing reference materials for TAPPI Standards
Producers of pulp or paper: SSIG members working for a corporation or subunit of a corporation whose major activity is the production of pulp or paper.
Converters of pulp or paper: SSIG members working for a corporation or subunit of a corporation whose major activity is the conversion of pulp or paper into some finished or intermediate manufactured state. Converters would include, but is not limited to, producers of corrugated roll goods, manufacturers of boxes, converters who buy rolls of tissue paper and convert it into finished saleable consumer goods, converters who use paper or similar materials to produce packaging of various kinds (including flexible packaging) and numerous similar producers of paper goods.
Suppliers of chemical or raw materials: SSIG members who are working for a corporation or subunit of a corporation whose major activity is to supply raw materials or chemicals for the manufacture of pulp or paper.
Suppliers of manufacturing equipment, instrumentation and online controls: SSIG members who are working for a corporation or subunit of a corporation whose major activity is to supply manufacturing equipment, instrumentation, or online controls for the manufacture of pulp or paper.
Service and general suppliers: SSIG members who are working for a corporation or subunit of a corporation whose major activity is providing for producers of pulp and paper a service or any other commodity not included in the other supplier categories.
Commercial users of pulp or paper: SSIG members who are working for a corporation or subunit of a corporation whose major activity is the use of paper, pulp, corrugated, packaging material, or other related product after it has been produced and further converted into some finished sheet or roll form or intermediate finished article of commerce. This includes printers or, in general, any entity using paper where that use does not generally fit under the term "converter."
Marketers and Commercial Sellers: SSIG members who are working for a corporation or subunit of a corporation whose major activity is the marketing or sales of pulp or paper. This might include but is not limited to companies whose focus is the wholesale or retail selling of paper and paper products including cut size paper, paper tissue products, artist paper supplies, paper merchants, recyclers, etc.
Consultants: SSIG members who are independent contractors and who may provide consulting services to any segment of the industry.
Educators: SSIG members who teach or are employed by an academic institution.
General Interest: SSIG members who are not covered under any of the above categories; this category may include, but is not limited to, members affiliated with trade associations, professional societies, or government agencies, and retirees.